Loft Pull

Rustica Lock Measuring Guide

Measuring Distance

This is the measurement from the top of your door to where you'd like the lock handle. This measurement allows you the flexibility to place the locking mechanism where it will not interfere with any existing handles or fixtures pre-mounted to the door. You'll need at least 2-1/8" clearance below. See Picture

Hole Placement

Introducing an easy solution to little ones slamming your barn door! Our new Closure soft-stop system slows you door down before it makes contact with the track stop. This ensures a smooth stop every time. The Closure system has been specially designed to be universal with all Rustica Hardware flat track systems, no matter the length of track this product will work with your flat track system. Product comes with (2) Closure mechanisms (one for each side of the track system) to protect your system whether it’s being opened or closed.

If you're just replacing a slab, fill in the exact measurements of the existing slab. If you're purchasing your slab with a jamb then a good rule of thumb is to measure your rough openings width and remove 2", that will be the width you want to input on the site. For height measure from the floor to the top of the rough opening and remove 2.25", this will be the height you need to input for the height.

Measure the existing slab, that you're wanting to replace, from the top of the door to the top of each hinge. You will format your entry in this format: Hinge 1- 10" from top of door. Hinge 2- 22.

NOTE: The current lead time for Brushed Steel and Brushed Stainless Steel on the Box system type is 7 weeks.